Series 1750 Sliding Door

Description: 1750 Series Sliding Door is a multi-track system using tandem bottom rollers. Panels are fabricated using 1 3/4" (44.5mm) aluminum door profiles; egress door insert available.

Finish: Sliding door materials stocked in #17 clear and #40 bronze anodized. Other finishes are available upon request.

Limitations: 1750 Series is designed for interior applications. Min. panel size 36" x 84" & max. panel size 72" x 130". Each roller has weight limitation of 120 lb. Therefore, each panel should not exceed 240 lb. including glass and hardware. The ratio between height and width should not exceed 3:1 to avoid tilting panels during operation.

Assembly: Welded corner bracket assembly.

Strength: Refer to wind load charts for maximum allowable span. Consult structural engineer for final design.

Anchoring: Refer to fabrication and installation manual.

Glazing: Series 1750 Doors will accept 3/16" (5mm), 3/8" (10mm) or 1/2" (12mm) single glass and 29/32" (23mm) sealed unit.

PDF Catalogue Autocad Specs

Products in This Category

View all products